Pole and flat stand
| B19-Flat_stand_right | |
|---|---|
| Latest version download | pib-stls/B-Body/B19-Flat_stand_right.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | |
| Suggested layer height | 0.3 mm |
| Suggested infill percentage | 60%-70% |
| Supports | None |
| Number of this part for one arm Pib | 1 |
| Number of this part for two arm Pib | 1 |
| Suggested orientation |  |
| After printing processing | None |
| B20-Flat_stand_left | |
|---|---|
| Latest version download | pib-stls/B-Body/B20-Flat_stand_left.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | |
| Suggested layer height | 0.3 mm |
| Suggested infill percentage | 60%-70% |
| Supports | None |
| Number of this part for one arm Pib | 1 |
| Number of this part for two arm Pib | 1 |
| Suggested orientation |   |
| After printing processing | None |
