How to build pib.Brain – V2023

pib – our printable intelligent bot – consists of 130 printable parts and several non-printable parts. This is a lot! If you don´t have the time to build up pib entirely – but you still wish to be able to use pib´s software – we have a solution: the pib.Brain.

pib.Brain is a standalone project for using pib´s software by building up the head on a stand.

We have created a simple guide that you can use to assemble pib.Brain. Feel free to use it.

pib.Brain consists of 4 printable parts and is assembled in 11 steps.

Please make sure to build pib´s head and neck first. Follow these tutorial for building it: How to build pib´s head and How to build pib´s neck

To construct the stand for pib.Brain, you will need these printable and non-printable parts:

Printable parts	Non-printable parts
A81-Stand-back	1 x E03 Tinkerforge Servo_Bricklet-V2
A82-Stand-back-cover	1 x E13 SPL-82 (T-Connector)
2 x A83-Stand-front	4 x M13 distancers
	12 x S01 nuts
	4 x S02 6mm screws
	6 x S06 16mm screws
	2 x S08 20mm screws
	1 x bricklet cable
	1 x E14 PowerSupply
	71 cm black/red cable