FAQs Archiv - pib | The 3D Printable Robot

Q: Under which license is the hardware of pib released?

The hardware of pib is released under AGPL3.

Q: Does pib have a micro array or just one microphone?

pib uses a single microphone rather than a microphone array. This means it captures sound from one point rather than using multiple microphones to detect direction and filter noise. This way, we can keep the design simple and costs lower.

Q: What is the pib.Academy?

The pib.Academy is a collection of teaching and learning materials on pib-relevant topics - a kind of knowledge library for teachers. In addition to the basics of programming, robotics, 3D printing and CAD, specific topics relating to the construction modules are also covered. For example, the ‘Head’ construction module includes materials on topics such as ‘How does the eye work?’, ‘How does a camera work?’ and ‘3D vision’. Bionic relationships play a central role here. The module also offers information on ‘single-board computers’ and ‘pibs energy supply’, for example.

Q: What age is pib suitbale for?

Our experience shows that pib can be used well from 8th grade onwards. However, there are also ways to adapt and use pib for younger students.

Q: What is the individual support?

Of course, we and the community will support you with your pib.project. In addition, the pib.Box School includes 5 hours of individual support. These hours are intended for more specialised matters, such as an online kick-off session, regular online jour fixes or similar services.

Q: What does the printing support entail?

The pib.Box School includes 100 hours of printing support. This means that you can order us to print certain parts for you - for example, simply by e-mail. We will then send these parts to you.

Q: I can't get the nuts in. How can I manage that?

If you have difficulty getting the nuts into the right places, you can use a hammer and carefully hammer them in. If necessary, use a screwdriver to help fix them in the right place. Alternatively, a pipe spanner has also proven to be a useful tool. You can also find more information on this in this video .

Q: How long is the total printing time?

All 3D printed parts are different sizes and therefore take different amounts of time to print, from a few minutes to several hours. This results in a total printing time of just under 180 hours for a complete pib. You can also find detailed information on the printing times of the respective 3D printed parts in our print checklist.

Q: How much filament is required?

Printing one complete pib requires around 5 kg of filament.

Q: Which filament do you recommend?

We recommend using PETG. PETG is relatively easily printable. We prefer it to PLA mainly because it can resist higher temperatures and more mechanical stress. Therefore, it will give in a little upon pressure and it takes more to break it. However, if you wish to use PLA that is also possible of course, just make sure to tighten the screws with extra care.

FAQs

Under which license is the hardware of pib released?

Does pib have a micro array or just one microphone?

What is the pib.Academy?

What age is pib suitbale for?

What is the individual support?

What does the printing support entail?

I can’t get the nuts in. How can I manage that?

How long is the total printing time?

How much filament is required?

Which filament do you recommend?

About Us | Our Vision