Hand
pib’s hand is in the first partstudio „hand_and_finger“ in handfinger document.
| D1-Palm_left | |
|---|---|
| Latest version download | pib-stls/D-Hand_Fingers/D01-Palm_left.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | pib-stls/D-Hand_Fingers/D01-Palm_left.stl at main · pib-rocks/pib-stls · GitHub |
| Suggested layer height | 0.25 mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 75.4g |
| Suggested orientation |   |
| After printing processing | None |
| D2-Palm_right | |
|---|---|
| Latest version download | pib-stls/D-Hand_Fingers/D02-Palm_right.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | pib-stls/D-Hand_Fingers/D02-Palm_right.stl at main · pib-rocks/pib-stls · GitHub |
| Suggested layer height | 0.3 mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 75.4g |
| Suggested orientation |  |
| After printing processing | None |
| D10-Tube_cover | |
|---|---|
| Latest version download | pib-stls/D-Hand_Fingers/D10-Tube_cover.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | pib-stls/D-Hand_Fingers/D10-Tube_cover.stl at main · pib-rocks/pib-stls · GitHub |
| Suggested layer height | 0.25 mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 2 |
| Mass – (Mass with supports) | 2.4g |
| Suggested orientation |  |
| After printing processing | None |
| D11-Ballbearing_enclosure | |
|---|---|
| Latest version download | pib-stls/D-Hand_Fingers/D11-Ballbearing_enclosure.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | pib-stls/D-Hand_Fingers/D11-Ballbearing_enclosure.stl at main · pib-rocks/pib-stls · GitHub |
| Suggested layer height | 0.25 mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 2 |
| Mass – (Mass with supports) | 0.5g |
| Suggested orientation |  |
| After printing processing | None |
| D11-R-Ballbearing_enclosure_right | |
|---|---|
| Latest version download | pib-stls/D-Hand_Fingers/D11-R-Ballbearing_enclosure_right.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | pib-stls/D-Hand_Fingers/D11-R-Ballbearing_enclosure_right.stl at main · pib-rocks/pib-stls · GitHub |
| Suggested layer height | 0.25 mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 2 |
| Mass – (Mass with supports) | 0.5g |
| Suggested orientation |  |
| After printing processing | None |
