Standalone head project

A83-Stand-front
Latest version downloadpib-stls/A-Head/A83-Stand-front.stl at main · pib-rocks/pib-stls · GitHub
Stable release downloadpib-stls/A-Head/A83-Stand-front.stl at main · pib-rocks/pib-stls · GitHub
Suggested layer height0.25mm
Suggested infill percentage20%-30%
SupportsNone
Number of this part for one arm pib2
Number of this part for two arm pib2
Mass – (Mass with supports)56g
Suggested orientation
After printing processingNone
A81-Stand-back
Latest version downloadpib-stls/A-Head/A81-Stand-back.stl at main · pib-rocks/pib-stls · GitHub
Stable release downloadpib-stls/A-Head/A81-Stand-back.stl at main · pib-rocks/pib-stls · GitHub
Suggested layer height0.25mm
Suggested infill percentage20%-30%
SupportsNone
Number of this part for one arm pib1
Number of this part for two arm pib1
Mass – (Mass with supports)109g
Suggested orientation
After printing processingNone
A82-Stand-back-cover
Latest version downloadpib-stls/A-Head/A82-Stand-back-cover.stl at main · pib-rocks/pib-stls · GitHub
Stable release downloadpib-stls/A-Head/A82-Stand-back-cover.stl at main · pib-rocks/pib-stls · GitHub
Suggested layer height0.25mm
Suggested infill percentage20%-30%
SupportsNone
Number of this part for one arm pib1
Number of this part for two arm pib1
Mass – (Mass with supports)58g
Suggested orientation
After printing processingNone
Nach oben