Standalone arm project
| A83-Stand-front | |
|---|---|
| Latest version download | pib-stls/A-Head/A83-Stand-front.stl at main · pib-rocks/pib-stls · GitHub |
| Stable release download | pib-stls/A-Head/A83-Stand-front.stl at main · pib-rocks/pib-stls · GitHub |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 2 |
| Number of this part for two arm pib | 2 |
| Mass – (Mass with supports) | 56g |
| Suggested orientation |   |
| After printing processing | None |
| A84-Arm_stand_back | |
|---|---|
| Latest version download | |
| Stable release download | |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 258g |
| Suggested orientation |  |
| After printing processing | None |
| A85-Arm_stand_back_cover | |
|---|---|
| Latest version download | |
| Stable release download | |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 164g |
| Suggested orientation |  |
| After printing processing | None |
| A87-Arm_stand_rotator | |
|---|---|
| Latest version download | |
| Stable release download | |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 87g |
| Suggested orientation |  |
| After printing processing | None |
| A89-Arm_stand_LCD_holder | |
|---|---|
| Latest version download | |
| Stable release download | |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | paint on supports |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 225g |
| Suggested orientation |  |
| After printing processing | None |
| A86-Arm_stand_scaffold | |
|---|---|
| Latest version download | |
| Stable release download | |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 28.5g |
| Suggested orientation |  |
| After printing processing | None |
| A86-Arm_stand_wire_cover | |
|---|---|
| Latest version download | |
| Stable release download | |
| Suggested layer height | 0.25mm |
| Suggested infill percentage | 20%-30% |
| Supports | None |
| Number of this part for one arm pib | 1 |
| Number of this part for two arm pib | 1 |
| Mass – (Mass with supports) | 4g |
| Suggested orientation |  |
| After printing processing | None |
